← News & Intelligence
News

RMIT tests carbon fiber spine joints for 3D printed architectural composites

Researchers at RMIT University tested seven joint designs for 3D printed PETG shells, finding that continuous carbon fiber reinforcement significantly enhances joint strength.

Researchers at the Tectonic Formation Lab at RMIT University in Melbourne have conducted flexural tests on seven joint designs for robotically 3D printed polymer shells reinforced with carbon fiber composites. Their findings indicate that a continuous internal carbon fiber "spine" significantly enhances joint strength. This research, published in June 2026 in Architectural Intelligence, was applied in the lab's Ghost Tectonics architectural demonstrator and will be expanded through larger-scale testing.

The study, authored by Alan "Ho Kyeong" Kim, Stuart Bateman, Phillip Crothers, and Roland Snooks, highlights the challenges of large-scale additive manufacturing (LFAM). Continuous geometries must be divided into segments due to constraints like robot reach, print bed size, and sequential curing, creating seams that are structurally critical in multi-material systems.

The substrates were produced using robotic fused granulate fabrication (FGF) from polyethylene terephthalate glycol (PETG) pellets, while internal spine cores were printed on a desktop fused filament fabrication (FFF) printer. Carbon fiber and E-glass, both 200-gram/square meter plain-weave fabrics, were applied using wet layup and vacuum bagging with an epoxy resin. Fastened designs incorporated M4 steel clinch floating nuts bonded into the spine.

In ASTM D790 three-point bending tests, the configuration with a carbon fiber spine and plate achieved the highest flexural strength. Designs lacking or interrupting the internal spine performed significantly worse, regardless of the presence of an external plate. The authors concluded that the plate serves mainly as secondary reinforcement, with joint performance relying on the integration of reinforcement continuity, fastening, and interface geometry.

The Ghost Tectonics project was developed in collaboration with Boeing Aerostructures Australia, Hightex Verstärkungsstrukturen GmbH, and the Leibniz-Institut für Polymerforschung Dresden through the RMIT-Boeing Research Alliance. It integrates large-format 3D printing with tailored fiber placement (TFP) of 150K-tow carbon fiber along principal stress paths. The full-scale build encountered challenges such as precise spine placement in curved geometries, small deformations from vacuum curing, and the alignment of the spine, substrate, and plate. These issues led to a second round of joint designs.

The research team plans to create intermediate-scale specimens that approximate the demonstrator's curvature and loading, along with a systematic comparison of external plate systems.

For further details, the complete study is available in Architectural Intelligence.

Source: Carbon Fiber Feed

Companies mentioned
RMIT University
Carbon Fiber
Construction
Research & InnovationSustainability
Carbon Fiber material profile →
← Back to News & Intelligence